Symptoms:

  • Bushing wear
  • Bushing failure
  • Ratio codes
  • B Clutch burned

Cause:

OE bushing material composition allows premature wear.

Correction:

Install improved Sonnax input/output shaft bushings to restore critical clearances and resist untimely wear.

Warning:

Caution: Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so will distort the bushing and cause fitment issues.

,6R80 (2009-2014),6R80 (2015-Later),ZF6HP19,ZF6HP26,ZF6HP28

Input/Output Shaft Bushing
Part No.95030-05

Fits units with .669" (16.98mm) dia. shaft journals only.

Package Quantity:6

View Instructions Find a Distributor

The OE bushings used at the input-to-intermediate shaft and intermediate-to-output shaft in ZF6HP19, ZF6HP26, ZF6HP28 and Ford 6R80 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, pressure control codes, and loss of correct pressure to the B-clutch. Sonnax input/output shaft bushing 95030-05 features superior wear characteristics, eliminating premature deterioration for worry-free operation. The upgraded material composition outperforms the OE bushing.

  • Bushing Style: Precision
  • Material: Bimetal
  • 房价孔:0.788"
  • Shaft Dia.: 0.669"
  • Width: 0.393"
  • , 6R80 (2009-2014), 6R80 (2015-Later), ZF6HP19, ZF6HP26, ZF6HP28 Input/Output Shaft Bushing 95030-05
  • , 6R80 (2009-2014), 6R80 (2015-Later), ZF6HP19, ZF6HP26, ZF6HP28 Input/Output Shaft Bushing 95030-05