Symptoms:

  • B Clutch burned
  • Bushing wear
  • Bushing failure
  • Ratio codes

Cause:

OE bushing material composition allows premature wear.

Correction:

Install improved Sonnax sun gear shaft bushings to restore critical clearances and resist untimely wear.

Warning:

Caution: Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so will distort the bushing and cause fitment issues.

ZF6HP26,ZF6HP28

Sun Gear Shaft Bushing
Part No.95030-06

Fits units with .952" (24.17mm) dia. shaft journals only.

Package Quantity:6

Find a Distributor

The OE sun gear shaft bushings located at front and rear of the sun gear shaft in ZF6HP26 and ZF6HP28 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, pressure control codes, and burnt B-clutches. Sonnax sun gear shaft bushing 95030-06 features superior wear characteristics, eliminating premature deterioration for worry-free operation.

  • Bushing Style: Precision
  • Material: Bimetal
  • Housing Bore: 1.063"
  • Width: 0.393"
  • Shaft Dia.: 0.952"
  • ZF6HP26, ZF6HP28 Sun Gear Shaft Bushing 95030-06
  • ZF6HP26, ZF6HP28 Sun Gear Shaft Bushing 95030-06