Symptoms:

  • Blown filters
  • Delayed Reverse with harsh engagement
  • No Reverse
  • Poor line pressure control

Cause:

Continuous pressure regulator valve oscillation wears the casting bore, allowing pressure leakage.

Correction:

Sonnax highly wear-resistant, drop-in pressure regulator sleeve re-establishes the hydraulic integrity of the circuits and salvages the valve body. Sonnax pressure regulator valve available separately to replace worn or missing OE version.

TAAT

Pressure Regulator Valve
Part No.95200-06

You need this if... View Instructions Find a Distributor

In Saturn TAAT units, the pressure regulator valve is electronically controlled and oscillates continuously in the casting bore, causing excessive wear. This wear will prevent proper stroking of the valve and line pressure will go higher or lower than commanded. The hydraulic integrity of the circuit can be re-established by using the highly wear-resistant Sonnax pressure regulator sleeve95200-05Kwith the OE pressure regulator valve. A OE-sized Sonnax pressure regulator valve95200-06is available when the casting has been remanufactured or the original valve is damaged.

  • Valve and sleeve available separately since both are not required in all instances
  • Sleeve provides more contact area with the valve and reinforces the bore, which can be compromised by wear and the excessive porosity of the valve body casting
  • Sleeve and valve kit can be used with previously remanufactured castings that have worn again with an oversized valve
  • Drop-in Zip Valve™ installs quickly and easily
Learn More About Zip Valve™ Drop-In Repairs
  • TAAT Pressure Regulator Valve 95200-06
  • TAAT Pressure Regulator Valve 95200-06

You need this if...

Vacuum testing at the port(s) indicated fails to hold the recommended minimum in-Hg, or if wear is visually detected.

TAAT Pressure Regulator Valve Vacuum Test Locations