Symptoms:

  • Chatter on acceleration
  • No ratio change
  • Noise on acceleration
  • Low solenoid feed pressure
  • Push belt slippage
  • Increased push belt & pulley wear
  • Low line rise

Cause:

Regulated solenoid pressure feeds all the linear pressure control solenoids. Depending on the amount and location of bore wear, solenoid pressure will either be low or unable to regulate higher pressures.

Correction:

Sonnax drop-in solenoid regulator valve kit restores proper regulation of solenoid feed oil pressure.

JF010E (RE0F09A/RE0F09B),JF011E (RE0F10A)

Solenoid Regulator Valve Kit
Part No.113741-01K

一个lso fits Mitsubishi F1CJA.

You need this if... View Instructions Find a Distributor

Sonnax solenoid regulator valve kit 113741-01K addresses problems caused by solenoid regulator pressure leakge in listed Jatco/Nissan CVT units. The new spring along with the wear-resistant sleeve and valve help restore proper regulation of solenoid feed oil pressure through improved spring calibration, wear-resistant materials, improved valve support and centering within the bore.

  • Hardcoat anodized aluminum valve combats premature wear
  • 一个nnular grooves keep the valve centered in the bore and reduce side loading
  • The highly wear-resistant Sonnax valve and sleeve provide improved hydraulic sealing
  • The Sonnax sleeve design covers more valve support than the OE casting
  • Drop-in Zip Valve™ parts install quickly and easily
Learn More About Zip Valve™ Drop-In Repairs
  • Valve
  • Sleeve
  • Spring

Sonnax valve body layouts provide a detailed overview of individual units making it quick and easy to determine what’s available for the specific valve body you’re working on.看到所有Sonnax阀体布局.

Jatco/Nissan JF011E (RE0F10A) Valve Body Layout

Jatco/Nissan JF011E (RE0F10A) Valve Body Layout

Jatco/Nissan JF010E (RE0F09A/RE0F09B) Valve Body Layout

Jatco/Nissan JF010E (RE0F09A/RE0F09B) Valve Body Layout
  • JF010E (RE0F09A/RE0F09B), JF011E (RE0F10A) Solenoid Regulator Valve Kit 113741-01K
  • JF010E (RE0F09A/RE0F09B), JF011E (RE0F10A) Solenoid Regulator Valve Kit 113741-01K
  • JF010E (RE0F09A/RE0F09B), JF011E (RE0F10A) Solenoid Regulator Valve Kit 113741-01K

You need this if...

Vacuum testing at the port(s) indicated fails to hold the recommended minimum in-Hg, or if wear is visually detected.

JF010E (RE0F09A/RE0F09B), JF011E (RE0F10A) Solenoid Regulator Valve Kit Vacuum Test Locations
JF010E (RE0F09A/RE0F09B), JF011E (RE0F10A) Solenoid Regulator Valve Kit Vacuum Test Locations