Symptoms:
- Damaged washers
- Excess endplay
Cause:
The plastic material used by the OE melts or breaks under normal operation.Correction:
Install these bimetal thrust washers to prevent thrust washer breakage and ensure proper endplay.180,180 c(3翻译),4L30-E
Thrust Washer & Shim Kit
Part No.54701-03K
View Instructions
Find a Distributor
The OE plastic 3-tab washers break or melt under normal operation in listed GM units. Sonnax 3-tab bimetal thrust washer and shim kit 54701-03K replaces the OE plastic washers in both pump and center support locations.
- The steel tabs on the Sonnax thrust washer eliminate breakage
- The bronze thrust surface will not melt like the OE plastic thrust washers
- Shims provide more flexibility when setting endplay and allow for rebuilding units after thepump has been resurfaced. The Sonnax washer kit can be stacked to cover a build height from .075" through .125" in .010" increments
- This kit contains enough parts for pump and stator support locations
The Sonnax thrust washer kit cannot be used to replace late style no-tab thrust washers.
- 3-Tab Thrust Washers (2).075"
- Shims (4).010"
- 垫片(2).030"
- Material: Bimetal
- Tab Count: 3
- Outer Dia.: 2.500"
- Inner Dia.: 1.740"
- Thickness: 0.074"
